Epson EX71 image too dim to read from the back of the classroom? Lamp output has fallen below 50 percent of rated lumens. Genuine ELPLP58 module fitted at your address.
Epson EX71 ELPLP58 projector lamp at your door in Hyderabad ₹149visit charge
Dim image, lamp warning, or auto-shutdown on your Epson EX71?
The Epson EX71 SVGA business projector uses the ELPLP58 (V13H010L58) lamp module, a 200W UHE arc rated for 4,000 hours in normal mode and 5,000 hours in eco. Past those hours the lumens fall below half, the warning LED starts blinking, and thermal protection kicks in. We carry genuine OEM modules and fit them at your address in 45 to 60 minutes including dust-filter clean and ballast cable check.
Free issue check included — we’ll be in touch shortly
₹149 visit + on-site checkGenuine OEM lamp module ELPLP58 (V13H010L58). The same 200W UHE arc Epson fits at the factory, supplied by authorised distributors with batch traceability. The fit: remove lamp access panel, disconnect ballast cable, extract the old module, insert the new module, reseat the cable, reset the lamp-hours counter through the service menu, then run a 15-minute brightness test on a white test slide. Includes a dust-filter clean and ballast cable inspection at the same visit.
The ELPLP58 module is the standard 200W UHE lamp across the EX71 generation. WhatsApp the model and serial; we confirm the right module before our technician dispatches.
Three SVGA / XGA business projectors widely deployed in Hyderabad coaching centres and corporate training rooms. All three share the ELPLP58 module — one part stocks all three.
The EB-series boardroom projectors of the same generation also accept the ELPLP58. Same lamp drawer geometry, same ballast voltage, same hours-counter reset procedure.
If your projector was an import or grey-market unit, the PowerLite S7 and X7 carry the same ELPLP58 cartridge. Send a photo of the lamp door label and we confirm before fitting.
Lamp degradation is gradual. Most owners notice two or three of these before the arc gives out completely.
Lumens have dropped below 50 percent of rated. Whiteboard glare washes the projection out. The most common reason owners book a replacement.
Hour counter has crossed the 4,000-hour threshold. Replace before the mercury arc fails completely; arc rupture inside a hot envelope can fragment into the optical engine.
Projector runs 10 to 30 minutes, then shuts off. A degraded lamp drawing excess current trips the thermal protection circuit. New lamp stabilises the load.
Mercury vapour composition shifts as the arc ages. Genuine replacement restores the original 6,500K to 7,500K white point.
Arc has failed completely. Fans still spin but the lamp circuit is open. Replacement module fitted, ballast voltage verified before payment.
Ballast voltage drifts as the lamp ages. Image stabilises only after 20 minutes. New ELPLP58 with ballast cable inspection clears the flicker.
Genuine ELPLP58 module plus doorstep fit starts at ₹4,500. Includes ballast cable check, dust-filter clean, lamp-hours counter reset, and 30-day warranty. ₹149 visit waived if you proceed. No Fix, No Fee.
From WhatsApp to a working Epson EX71 in four steps. Coaching centre, conference room, or home theatre, anywhere in Hyderabad.
WhatsApp 7702503336 with model and a photo of the lamp warning LED. We confirm the ELPLP58 fits your unit and quote within five minutes.
Coaching centre in Ameerpet, training room in HiTec City, classroom in Banjara Hills. We confirm a 60 to 120 minute slot.
Genuine ELPLP58 module, screwdrivers, anti-static gloves, dust-filter replacement kit, lumen meter. Old lamp extracted, new module inserted, ballast cable reseated, hours counter reset.
Full-brightness run for 15 minutes, colour accuracy checked on white and grey test slides, lamp warning indicator confirmed clear. Pay only after the image looks right. UPI, cash, or net banking.
Third-party ELPLP58 clones save ₹1,000 to ₹2,000 upfront, then fail 3 to 5 times faster, shift the white point visibly, and void any warranty. We source genuine OEM modules from authorised distributors only.
Genuine OEM ELPLP58 modules. Same arc-tube quality the Epson factory uses. Third-party tubes are re-processed arcs with 30 to 40 percent lower initial lumen output.
Engineer arrives with the lamp module and tools. 45 to 60 minute fit including dust-filter clean and ballast cable check. No second visit.
Every part we fit carries a 30-day replacement warranty. Local accountability, not marketplace ship-and-forget.
Lamp replacement does not touch the projector circuit board or memory. Lens calibration, keystone settings, and input source presets stay exactly as you had them.
You don’t carry a faulty projector across Hyderabad traffic. Engineer arrives at your office, school, or home. ₹149 visit, waived if you proceed.
Dim image is not always a lamp problem. We measure lumen output on-site first. If the optical block or colour wheel is the cause, we quote that instead. No Fix, No Fee.
Every SKU page below has its own pricing, fitment notes, and FAQ.
Real ratings from customers across Hyderabad. Tap the badge to read live reviews on Justdial.
Questions Hyderabad EX71 owners ask before booking.
Genuine ELPLP58 module, doorstep in Hyderabad, 30-day warranty. Pay only after the image looks right at full brightness.